Client Portal

Standards

Standards
  • 40 CFR Part 770 TSCA Title VI – Formaldehyde Emission Standards for Composite Wood Products
  • AAMA 101 (AAMA/WDMA/CSA/101./IS.2/A440) – North American Fenestration Standard (NAFS) / specification for windows, doors, and skylights
  • AAMA 1702.2 – Swinging Exterior Passage Doors Voluntary Standard for Utilization in Manufactured-Housing
  • AATCC 127 – Water resistance – hydrostatic pressure test mortar
  • AISI S904 – Standard Test Methods for Determining the Tensile and Shear Strength of Screws
  • AISI S905 – Test Standard for Cold-Formed Steel Connections
  • ANSI A118.1 – Specifications for standard dry-set cement
  • ANSI A118.4 – Specifications for modified dry-set cement mortar
  • ANSI A118.10 – Standard specifications for load bearing, bonded, waterproof membranes for thin-set ceramic tile and dimension stone installation
  • ANSI A136.1 – Organic adhesives for installation of ceramic tile
  • ANSI/TPI 1 – National design standard for metal plate connected wood truss construction
  • APA AFG-01 – Adhesives for field-gluing plywood to wood framing
  • ASTM A90 – Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
  • ASTM A370 – Standard Test Methods and Definitions for Mechanical Testing of Steel Products
  • ASTM B117 – Standard Practice for Operating Salt Spray (Fog) Apparatus
  • ASTM C36/C36M – Standard specification for gypsum wallboard
  • ASTM C109 – Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens)
  • ASTM C165 – Standard test method for measuring compressive properties of thermal insulations
  • ASTM C167 – Standard test methods for thickness and density of blanket or batt thermal insulations
  • ASTM C191 – Standard Test Methods for Time of Setting of Hydraulic Cement by Vicat Needle
  • ASTM C203 – Standard test methods for breaking load and flexural properties of block-type thermal insulation
  • ASTM C266 – Standard Test Method for Time of Setting of Hydraulic-Cement Paste by Gillmore Needles
  • ASTM C267 – Standard Test Methods for Chemical Resistance of Mortars, Grouts, and Monolithic Surfacings and Polymer Concretes
  • ASTM C271/C271M – Standard test method for density of sandwich core materials
  • ASTM C272/C272M – Standard test method for water absorption of core materials for sandwich constructions
  • ASTM C273/C273M – Standard test method for shear properties of sandwich core materials
  • ASTM C297/C297M – Standard test method for flatwise tensile strength of sandwich construction
  • ASTM C303 – Standard test method for dimensions and density of preformed block and board -type thermal insulation
  • ASTM C307 – Standard Test Method for Tensile Strength of Chemical-Resistant Mortar, Grouts, and Monolithic Surfacings
  • ASTM C308 – Standard Practice for Working, Initial Setting, and Service Strength Setting Times of Chemical-Resistant Resin Mortars
  • ASTM C321 – Standard Test Method for Bond Strength of Chemical-Resistant Mortars
  • ASTM C364/C364M – Standard test method for edgewise compressive strength of sandwich constructions
  • ASTM C365 – Standard Test Method for Flatwise Compressive Properties of Sandwich Cores
  • ASTM C373 – Standard Test Methods for Determination of Water Absorption and Associated Properties by Vacuum Method for Pressed Ceramic Tiles and Glass Tiles and Boil Method for Extruded Ceramic Tiles and Non-tile Fired Ceramic Whiteware Products
  • ASTM C393/C393M – Standard test method for core shear properties of sandwich constructions by beam flexure
  • ASTM C413 – Standard Test Method for Absorption of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
  • ASTM C473 – Standard test methods for physical testing of gypsum panel products
  • ASTM C480 – Standard Test Method for Flexure Creep of Sandwich Constructions
  • ASTM C481 – Standard Test Method for Laboratory Aging of Sandwich Constructions
  • ASTM C482 – Standard Test Method for Bond Strength of Ceramic Tile to Portland Cement Paste
  • ASTM C501 - Standard Test Method for Relative Resistance to Wear of Unglazed Ceramic Tile by the Taber Abraser
  • ASTM C518 – Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
  • ASTM C531 – Standard Test Method for Linear Shrinkage and Coefficient of Thermal Expansion of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
  • ASTM C557 – Standard specification for adhesives for fastening gypsum wallboard to wood framing
  • ASTM C578 – Standard specification for rigid, cellular polystyrene thermal insulation
  • ASTM C579 – Standard Test Methods for Compressive Strength of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
  • ASTM C580 – Standard Test Method for Flexural Strength and Modulus of Elasticity of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
  • ASTM C627 – Standard test method for evaluating ceramic floor tile installation systems using the Robinson-type floor tester
  • ASTM C645 – Standard Specification for Nonstructural Steel Framing Members
  • ASTM C666 – Standard Test Method for Resistance of Concrete to Rapid Freezing and Thawing
  • ASTM C686 – Standard test method for parting strength of mineral fiber batt and blanket-type insulation
  • ASTM C947 – Standard test method for flexural properties of thin- section glass-fiber-reinforced concrete (using a simple beam with third point loading)
  • ASTM C954 – Standard Specification for Steel Drill Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Steel Studs from 0.033 in. (0.84 mm) to 0.112 in. (2.84 mm) in Thickness
  • ASTM C955 – Standard Specification for Cold-Formed Steel Structural Framing Member
  • ASTM C1002 – Standard Specification for Steel Self-Piercing Tapping Screws for Application of Gypsum Panel Products or Metal Plaster Bases to Wood Studs or Steel Studs
    1. ASTM C1177/C1177M – Standard specification for glass mat gypsum substrate for use as sheathing
    2. ASTM C1185 – Standard Test Methods for Sampling and Testing Non-Asbestos Fiber-Cement Flat Sheet, Roofing and Siding Shingles, and Clapboards
    3. ASTM C1264 – Standard specification for sampling, inspection, rejection, certification, packaging, marking, shipping, handling, and storage of gypsum panel products
    4. ASTM C1353 - Standard Test Method for Abrasion Resistance of Dimension Stone Subjected to Foot Traffic Using a Rotary Platform Abraser
    5. ASTM C1396/C1396M – Standard specification for gypsum board
    6. ASTM C1513 – Standard Specification for Steel Tapping Screws for Cold-Formed Steel Framing Connections
    7. ASTM D143 – Standard test methods for small clear specimens of timber
    8. ASTM D146/D146M – Standard test methods for sampling and testing bitumen saturated felts and woven fabrics for roofing and waterproofing
    9. ASTM D198 – Standard test methods of static tests of lumber in structural sizes
    10. ASTM D226 – Standard specification for asphalt-saturated organic felt used in roofing and waterproofing
    11. ASTM D412 – Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension
    12. ASTM D570 – Standard test method for water absorption of plastics
    13. ASTM D635 – Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position
    14. ASTM D638 – Standard test method for tensile properties of plastics
    15. ASTM D648 – Standard test method for deflection temperature of plastics under flexural load in the edgewise position
    16. ASTM D696 – Standard test method for coefficient of linear thermal expansion of plastics between −30°C and 30°C with a vitreous silica dilatometer
    17. ASTM D751 – Standard Test Methods for Coated Fabrics
    18. ASTM D779 – Standard Test Method for Determining the Water Vapor Resistance of Sheet Materials in Contact with Liquid Water by the Dry Indicator Method
    19. ASTM D790 – Standard test methods for flexural properties of unreinforced and reinforced plastics and electrical insulating materials
    20. ASTM D792 – Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement
    21. ASTM D828 – Standard test method for tensile properties of paper and paperboard using constant-rate-of-elongation apparatus
    22. ASTM D882 – Standard test method for tensile properties of thin plastic sheeting
    23. ASTM D896 – Standard Practice for Resistance of Adhesive Bonds to Chemical Reagents
    24. ASTM D903 – Standard test method for peel or stripping strength of adhesive bonds
    25. ASTM D905 – Standard test method for strength properties of adhesive bonds in shear by compression loading
    26. ASTM D1002 – Standard test method for apparent shear strength of single-lapjoint adhesively bonded metal specimens by tension loading (metal-to-metal)
    27. ASTM D1037 – Standard test methods for evaluating properties of wood- base fiber and particle panel materials
    28. ASTM D1044 - Standard Test Method for Resistance of Transparent Plastics to Surface Abrasion by the Taber Abraser
    29. ASTM D1084 – Standard test methods for viscosity of adhesives 
    30. ASTM D1101 – Standard test methods for integrity of adhesive joints in structural laminated wood products for exterior use
    31. ASTM D1183 – Standard Practices for Resistance of Adhesives to Cyclic Laboratory Aging Conditions
    32. ASTM D1204 – Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature
    33. ASTM D1212 – Standard Test Methods for Measurement of Wet Film Thickness of Organic Coatings
    34. ASTM D1413 – Standard test method for wood preservatives by laboratory soil-block cultures
    35. ASTM D1621 – Standard test method for compressive properties of rigid cellular plastics
    36. ASTM D1622/D1622M – Standard test method for apparent density of rigid cellular plastics
    37. ASTM D1623/D1623M – Standard test method for tensile and tensile adhesion properties of rigid cellular plastics
    38. ASTM D1709 – Standard Test Methods for Impact Resistance of Plastic Film by the Free-Falling Dart Method
    39. ASTM D1761 – Standard test methods for mechanical fasteners in wood
    40. ASTM D1876 – Standard test method for peel resistance of adhesives (T- peel test)
    41. ASTM D1922 – Standard Test Method for Propagation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method
    42. ASTM D1929 – Standard Test Method for Determining Ignition Temperature of Plastics
    43. ASTM D1970 – Standard Specification for Self-Adhering Polymer Modified Bituminous Sheet Materials Used as Steep Roofing Underlayment for Ice Dam Protection
    44. ASTM D2017 – Standard test method of accelerated laboratory test of natural decay resistance of woods
    45. ASTM D2126 – Standard Test Method for Response of Rigid Cellular Plastics to Thermal and Humid Aging
    46. ASTM D2240 – Standard test method for rubber property—durometer hardness
    47. ASTM D2244 – Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally measured Color Coordinates
    48. ASTM D2247 – Standard Practice for Testing Water Resistance of Coatings in 100 % Relative Humidity
    49. ASTM D2294 – Standard test method for creep properties of adhesives in shear by tension loading (metal-to-metal)
    50. ASTM D2394 – Standard Test Methods for Simulated Service Testing of Wood and Wood-Based Finish Flooring
    51. ASTM D2395 – Standard Test Methods for Specific Gravity of Wood and Wood Based Materials
    52. ASTM D2559 – Standard specification for adhesives for bonded structural wood products for use under exterior exposure conditions
    53. ASTM D2718 – Standard Test Methods for Structural Panels in Planar Shear
    54. ASTM D2843 – Standard Test Method for Density of Smoke from the Burning or Decomposition of Plastics
    55. ASTM D2863 – Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index)
    56. ASTM D2990 – Standard test methods for tensile, compressive, and flexural creep and creep-rupture of plastics
    57. ASTM D3024 – Performance specification protein-base adhesives for structural laminated wood products for use under interior (dry use) exposure conditions
    58. ASTM D3045 – Standard Practice for Heat Aging of Plastics Without Load
    59. ASTM D3345 – Standard test method for laboratory evaluation of wood and other cellulosic materials for resistance to termites
    60. ASTM D3389 - Standard Test Method for Coated Fabrics Abrasion Resistance (Rotary Platform Abrader)
    61. ASTM D3500 – Standard Test Methods for Structural Panels in Tension
    62. ASTM D3501 – Standard Test Methods for Wood-Based Structural Panels in Compression
    63. ASTM D3675 – Standard Test Method for Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy Source
    64. ASTM D3737 – Standard practice for establishing allowable properties for structural glued laminated timber (glulam)
    65. ASTM D3801 – Standard Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position
    66. ASTM D3930 – Standard specification for adhesives for wood-based materials for construction of manufactured homes
    67. ASTM D4060 - Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser
    68. ASTM D4068 – Standard specification for chlorinated polyethylene (CPE) sheeting for concealed water-containment membrane
    69. ASTM D4317 – Standard specification for polyvinyl acetate-based emulsion adhesives 
    70. ASTM D4442 – Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Based Materials
    71. ASTM D4444 – Standard Test Method for Laboratory Standardization and Calibration of Hand-Held Moisture Meters
    72. ASTM D4761 – Standard Test Methods for Mechanical Properties of Lumber and Wood-Base Structural Material
    73. ASTM D4804 – Standard Test Method for Determining the Flammability Characteristics of Nonrigid Solid Plastics
    74. ASTM D4869/D4869M – Standard specification for asphalt-saturated organic felt underlayment used in steep slope roofing
    75. ASTM D4986 – Standard Test Method for Horizontal Burning Characteristics of Cellular Polymeric Materials
    76. ASTM D5034 – Standard Test Method for Breaking Strength and Elongation of Textile Fabrics (Grab Test)
    77. ASTM D5048 – Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of Solid Plastics Using a 125-mm Flame
    78. ASTM D5055 – Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists
    79. ASTM D5132 – Standard Test Method for Horizontal Burning Rate of Polymeric Materials Used in Occupant Compartments of Motor Vehicles
    80. ASTM D5199 – Standard Test Method for Measuring the Nominal Thickness of Geosynthetics
    81. ASTM D5206 – Standard test method for wind load resistance of rigid plastic siding
    82. ASTM D5322 – Standard Practice for Laboratory Immersion Procedures for Evaluating the Chemical Resistance of Geosynthetics to Liquids
    83. ASTM D5456 – Standard specification for evaluation of structural composite lumber products
    84. ASTM D5764 – Standard test method for evaluating dowel-bearing strength of wood and wood-based products
    85. ASTM D6108 – Standard test method for compressive properties of plastic lumber and shapes
    86. ASTM D6109 – Standard test methods for flexural properties of unreinforced and reinforced plastic lumber and related products
    87. ASTM D6111 – Standard test method for bulk density and specific gravity of plastic lumber and shapes by displacement
    • ASTM D6112 – Standard test methods for compressive and flexural creep and creep-rupture of plastic lumber and shapes
    • ASTM D6117 – Standard test methods for mechanical fasteners in plastic lumber and shapes
    • ASTM D6341 – test method for determination of the linear coefficient of thermal expansion of plastic lumber and plastic lumber shapes between –30 and 140°F (–34.4 and 60°C)
    • ASTM D6364 – Standard Test Method for Determining Short-Term Compression Behavior of Geosynthetics
    • ASTM D6435 – Standard test method for shear properties of plastic lumber and plastic lumber shapes
    • ASTM D6815 – Standard Specification for Evaluation of Duration of Load and Creep Effects of Wood and Wood-Based Products
    • ASTM D7031 – Standard Guide for Evaluating Mechanical and Physical Properties of Wood-Plastic Composite Products
    • ASTM D7032 – Standard Specification for Establishing Performance Ratings for Wood-Plastic Composite Deck Boards and Guardrail Systems (Guards or Handrails)
    • ASTM D7147 – Standard Specification for Testing and Establishing Allowable Loads of Joist Hangers
    • ASTM D7247 – Standard Test Method for Evaluating the Shear Strength of Adhesive Bonds in Laminated Wood Products at Elevated Temperatures
    • ASTM E8/E8M – Standard test methods for tension testing of metallic materials
    • ASTM E72 – Standard test methods of conducting strength tests of panels for building construction
    • ASTM E84 – Standard Test Method for Surface Burning Characteristics of Building Materials
    • ASTM E96/E96M – Standard test methods for water vapor transmission of material
    • ASTM E108 – Standard Test Methods for Fire Tests of Roof Coverings
    • ASTM E119 – Standard Test Methods for Fire Tests of Building Construction and Materials
    • ASTM E136 – Standard Test Method for Assessing Combustibility of Materials Using a Vertical Tube Furnace at 750°C
    • ASTM E162– Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source (See our video)
    • ASTM E228 – Standard Test Method for Linear Thermal Expansion of Solid Materials with a Push-Rod Dilatometer
    • ASTM E283/E283M – Standard test method for determining rate of air leakage through exterior windows, curtain walls, and doors under specified pressure differences across specimen
    • ASTM E330/E330M – Standard test method for structural performance of exterior windows, doors, skylights and curtain walls by uniform static air pressure difference
    • ASTM E331 – Standard test method for water penetration of exterior windows, skylights, doors, and curtain walls by uniform static air pressure difference
    • ASTM E455 – Standard test method for static load testing of framed floor or roof diaphragm constructions for buildings
    • ASTM E488 – Standard Test Methods for Strength of Anchors in Concrete Elements
    • ASTM E489 – Standard test method for tensile strength properties of metal connector plates
    • ASTM E529 – Standard guide for conducting flexural tests on beams and girders for building construction
    • ASTM E547 – Standard test method for water penetration of exterior windows, skylights, doors, and curtain walls by cyclic static air pressure difference
    • ASTM E564 – Standard practice for static load test for shear resistance of framed walls for buildings
    • ASTM E661 – Standard test method for performance of wood and wood-based floor and roof sheathing under concentrated static and impact loads
    • ASTM E767 – Standard test method for shear strength properties of metal connector plates
    • ASTM E779 – Standard test method for determining air leakage rate by fan pressurization
    • ASTM E814 – Standard Test Method for Fire Tests of Penetration Firestop Systems
    • ASTM E935 – Standard Test Methods for Performance of Permanent Metal Railing Systems and Rails for Buildings
    • ASTM E985 – Standard Specification for Permanent Metal Railing Systems and Rails for Buildings
    • ASTM E1233/E1233 – Standard test method for structural performance of exterior windows, doors, skylights, and curtain walls by cyclic air pressure differential
    • ASTM E1529 – Standard test methods for determining effects of large hydrocarbon pool fires on structural members and assemblies
    • ASTM E1592 – Standard test method for structural performance of sheet metal roof and siding systems by uniform static air pressure difference
    • ASTM E1725 – Standard test methods for fire tests of fire-resistive barrier systems for electrical system components
    • ASTM E1886 – Standard test method for performance of exterior windows, curtain walls, doors, and impact protective systems impacted by missile(s) and exposed to cyclic pressure differentials
    • ASTM E1966 – Standard test method for fire-resistive joint systems
    • ASTM E1996 – Standard specification for performance of exterior windows, curtain walls, doors, and impact protective systems impacted by windborne debris in hurricanes
    • ASTM E2010 – Standard test method for positive pressure fire tests of window assemblies
    • ASTM E2074 – Standard test method for tests of door assemblies, including Positive Pressure Testing of Side-Hinged and Pivoted Swinging Door Assemblies
    • ASTM E2127 – Standard methods of static load test for combined tensile and transverse load resistance of paneled wall systems in building construction
    • ASTM E2178 – Standard Test Method for Air Permeance of Building Materials
    • ASTM E2226 – Standard practice for application of hose stream
    • ASTM E2273 – Standard test method for determining the drainage efficiency of exterior insulation and finish systems (EIFS) clad wall assemblies
    • ASTM E2307 – Standard Test Method for Determining Fire Resistance of Perimeter Fire Barriers Using Intermediate-Scale, Multi-story Test Apparatus
    • ASTM E2322 – Standard test method for conducting transverse and concentrated load tests on panels used in floor and roof construction
    • ASTM E2357 – Standard Test Method for Determining Air Leakage Rate of Air Barrier Assemblies
    • ASTM E2556 – Standard Specification for Vapor Permeable Flexible Sheet Water-Resistive Barriers Intended for Mechanical Attachment
    • ASTM E2768 – Standard Test Method for Extended Duration Surface Burning Characteristics of Building Materials (30 min Tunnel Test)
    • ASTM E2925 – Standard Specification for Manufactured Polymeric Drainage and Ventilation Materials Used to Provide a Rain screen Function
    • ASTM F462 – Standard consumer safety specification for slip-resistant bathing facilities
    • ASTM F1087 – Standard Test Method for Linear Dimensional Stability of a Gasket Material to Moisture
    • ASTM F1575 – Standard Test Method for Determining Bending Yield Moment of Nails
    • ASTM F1678 – Standard test method for using a portable articulated strut slip tester (PAST)
    • ASTM F1679 – Standard Test Method for Using a Variable Incidence Tribometer (VIT)
    • ASTM G154 – Standard Practice for Operating Fluorescent Ultraviolet (UV) Lamp Apparatus for Exposure of Nonmetallic Materials
    • ASTM G155 – Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials
    • AWPA E1 – Laboratory methods for evaluating the termite resistance of wood-based materials: choice and no-choice test
    • BS 476 Part 20 – Fire tests on building materials and structures – method for determination of the fire resistance of elements of construction (general principles)
    • BS 476 Part 21 – Fire tests on building materials and structures – methods for determination of the fire resistance of loadbearing elements of construction
    • BS 476 Part 22 – Fire tests on building materials and structures – method for determination of the fire resistance of non- loadbearing elements of construction
    • CAN/4-S104 – Standard Method for Fire Tests of Door Assemblies
    • CAN/ULC S101 – Standard methods of fire endurance tests of building construction and materials
    • CAN/ULC S102 – Standard method of test for surface burning characteristics of building materials and assemblies
    • CAN/ULC S102.2 – Standard method of test for surface building characteristics of flooring, floor coverings, and miscellaneous materials and assemblies
    • CAN/ULC S115 – Standard method of fire tests of firestop systems
    • CAN/ULC S124 – Standard Method of Test for the Evaluation of Thermal Barriers for Foamed Plastic
    • CAN/ULC 9705-13 – Full-Scale Room test for Surface Products
    • CSA B45.5/IAPMO Z124 – Plastic Plumbing Fixtures
    • CSA S347 – Method of test for evaluation of truss plates used in lumber joints
    • EN 1363-1 – Fire-resistance tests – elements of building construction part 1: general requirements
    • EN 1363-2 – Fire resistance tests – elements of building construction part 2: alternative and additional procedures
    • EN 1364-1 – Fire resistance tests for non-loadbearing elements – part 1: walls
    • EN 1365-1 – Fire resistance tests for loadbearing elements – part 1: walls
    • EN 1365-2 – Fire resistance test for loadbearing elements – part 2: floors and roofs
    • EN 1634-1 – Fire resistance test for door and shutter assemblies – part 1: fire doors and shutters
    • FMVSS 302 / CMVSS 302 – Flammability of interior materials
    • ICC 500 – ICC/NSSA Standard for the Design and Construction of Storm Shelters, Large missile test per ASTM E1886 for designed wind speeds up to 250 mph
    • ICC-ES AC04 – Sandwich panels
    • ICC-ES AC05 – Sandwich panel adhesives
    • ICC-ES AC13 – Joist hangers and similar devices
    • ICC-ES AC14 – Prefabricated wood I-joists
    • ICC-ES AC30 – Fire-resistant joint systems
    • ICC-ES AC377 – Spray-applied foam plastic insulation
    • ICC-ES AC38 – Water-resistive barriers
    • ICC-ES AC47 – Structural wood-based products
    • ICC-ES AC48 – Self-adhered roof underlayments for use as ice barriers
    • ICC-ES AC49 – Molded plastic footing pads
    • ICC-ES AC84 – Testing of fire doors and windows under positive pressure
    • ICC-ES AC86 – Cold-formed steel framing members-interior non-load-bearing wall assemblies
    • ICC-ES AC100 – Air-conditioning Equipment Pads
    • ICC-ES AC116 – Acceptance Criteria for Nails
    • ICC-ES AC118 – Tapping Screw Fasteners Used in Steel-to-steel Connections
    • ICC-ES AC174 – Deck board span ratings and guardrail systems (guards and handrails)
    • ICC-ES AC188 – Roof underlayments
    • ICC-ES AC207 – Polypropylene roof underlayments
    • ICC-ES AC245 – Windows and doors subject to wind-borne debris
    • ICC-ES AC266 – Wood structural panel roof sheathing factory-laminated with an alternative roof underlayment
    • ICC-ES AC269 – Racking Shear Evaluation of Proprietary Sheathing Materials Attached to Light-frame Wall Construction or Code-complying Sheathing Attached to Light-framed Walls with Proprietary Fasteners
    • ICC-ES AC269.1 – Proprietary Sheathing Attached to Wood Light-Frame Wall Construction Used as Braced Wall Panels Under the IRC
    • ICC-ES AC269.2 – Proprietary Sheathing Jobsite-attached to Wood Light-frame Wall Construction Used as Shear Walls
    • ICC-ES AC273 – Acceptance Criteria for Hand Rails and Guards
    • ICC-ES AC274 – Acceptance Criteria for In-Ground, Residential, Fiber Reinforced Plastic Swimming Pools and Permanently installed Plastic Spas
    • ICC-ES AC279 – Acceptance Criteria for Vinyl-Lined Residential Swimming Pools
    • ICC-ES AC283 – Metal hinge plate connectors for wood trusses
    • ICC-ES AC295 – Laminated fibrous board sheathing material
    • ICC-ES AC310 – Water-resistive membranes factory-bonded to wood-based structural sheathing, used as water-resistive barriers
    • ICC-ES AC321 – Treated-engineered-wood siding
    • ICC-ES AC382 – Laminated fibrous board sheathing material used as a water-resistive barrier
    • IEC 60695-11-10 – Fire hazard testing – Part 11-10: Test flames – 50 W horizontal and vertical flame test methods
    • IMO Resolution A.754 (18) – Recommendation on fire resistance tests for ‘A’, ‘B’ and ‘F’ class divisions
    • ISO 834-1 – Fire-resistance tests — elements of building construction — part 1: general requirements
    • ISO 871-1996 – Plastics — Determination of ignition temperature using a hot-air furnace
    • ISO 1210 – Plastics — Determination of the burning behavior of horizontal and vertical specimens in contact with a small-flame ignition source
    • ISO 3008 – Fire-resistance tests — door and shutter assemblies
    • ISO 3009 – Fire-resistance tests — elements of building construction — glazed elements
    • ISO 9705 – Reaction to fire tests — Room corner test for wall and ceiling lining products
    • MIL-STD-3020 – Department of defense standard practice: fire resistance of U.S. naval surface ships
    • NFPA 255 – Standard Method of Test of Surface Burning Characteristics of Building Materials
    • NFPA 251 – Standard methods of tests of fire resistance of building construction and materials
    • NFPA 252 – Standard methods of fire tests of door assemblies
    • NFPA 257 – Standard on fire test for window and glass block assemblies
    • NFPA 265 – Standard Methods of Fire Tests for Evaluating Room Fire Growth Contribution of Textile or Expanded Vinyl Wall Coverings on Full Height Panels and Walls
    • NFPA 275 – Standard Method of Fire Tests for the Evaluation of Thermal Barriers
    • NFPA 285 – Standard Fire Test Method for Evaluation of Fire Propagation Characteristics of Exterior Wall Assemblies Containing Combustible Components
    • NFPA 286 – Standard Methods of Fire Tests for Evaluating Contribution of Wall and Ceiling Interior Finish to Room Fire Growth
    • NFPA 415 – Standard on airport terminal buildings, fueling ramp drainage, and loading walkways
    • SAE J78 – Steel Self-Drilling Tapping Screws
    • SFM Standard 12-7A-5 – Ignition Resistant Material
    • SFM Standard 12-7A-4, Part B – Burning Brand Exposure
    • TAS 201 – Impact test procedures
    • TAS 202 – Criteria for testing impact and non-impact resistant components using uniform static air pressure
    • TAS 203 – Criteria for testing products subject to cyclic wind pressure loading
    • UL 9 – Standard for fire tests of window assemblies
    • UL 10A – Standard for tin-clad fire doors
    • UL 10B – Standard for Fire Tests of Door Assemblies
    • UL 10C – Standard for Positive Pressure Fire Tests of Door Assemblies
    • UL 94 – Standard for Tests for Flammability of Plastic Materials for Parts in Devices and Appliances
    • UL 155 – Standard for tests for fire resistance of vault and file room doors
    • UL 263 – Standard for Fire Tests of Building Construction and Materials
    • UL 723 – Standard for Test for Surface Burning Characteristics of Building Materials
    • UL 790 – Standard for Standard Test Methods for Fire Tests of Roof Coverings
    • UL 1479 – Standard for fire tests of penetration firestops
    • UL 1709 – Standard for rapid rise fire tests of protection materials for structural steel
    • UL 1715 – Standard for Fire Test of Interior Finish Material
    • UL 2079 – Standard for tests for fire resistance of building joint systems

    Contact Us for a Quote Today!

    Find Certified Reports or Submit Your Product for Evaluation

    Reports Directory Get Certified