Categorías de listado

ICC Evaluation Service, LLC, actualmente ofrece listados para productos de construcción cubiertos por estándares de consenso existentes como se hace referencia en el IBC y el IRC. A continuación se muestran algunos ejemplos de categorías de productos a las que podemos enumerar productos. Por favor, póngase en contacto con nosotros para discutir la lista de su producto en una categoría que no se muestra a continuación, en:

1-800-423-6587 x3272, o dwong@icc-es.org
1-800-423-6587 x3877, o mtemesvary@icc-es.org

Listado de categorías por CSI

01 33 00 – Submittal Procedures

03 11 00 – Concrete Forming

04 00 00 – Masonry

04 01 00 – Maintenance of Masonry

04 20 00 – Unit Masonry

04 22 00 – Concrete Unit Masonry

04 73 00 – Manufactured Stone Masonry

06 05 83 – Shop-Applied Wood Coatings

06 15 33 – Wood Patio Decking

06 16 00 – Sheathing

06 17 19 – Cross-Laminated Timber

07 00 00 – Thermal and Moisture Protection

07 21 00 – Thermal Insulation

07 24 23 – Direct-Applied Finish Systems

07 25 00 – Water-Resistive Barriers/Weather Barriers

07 30 05 – Roofing Felt and Underlayment

07 44 16 – Porcelain Enameled Faced Panels

07 58 00 – Roll Roofing

07 84 00 – Firestopping

09 00 00 – Finishes

09 29 00 – Gypsum Board

10 14 43 – Photoluminescent Signage

23 05 29 – Hangers and Supports for HVAC Piping and Equipment

26 00 00 – Electrical

26 52 00 – Emergency Lighting

Listing Categories by Standard

AAMA A440 – North American Fenestration Standard/Specification for Windows, Doors, and Skylights..

ASCE 19-10 – Structural Applications of Steel Cables for Buildings.

ASTM A1023 – Standard Specification for Stranded Carbon Steel Wire Ropes for General Purposes

ASTM C1178 – Coated Water-Resistant Gypsum Backing Panels..

ASTM C1184 – Standard Specification for Structural Silicone Sealants..

ASTM C1396 – Specification for Gypsum Board..

ASTM C474 – Test Methods for Joint Treatment Materials for Gypsum Board Construction.

ASTM C847-09 – Standard Specification for Metal Lath.

ASTM C90 – Concrete Masonry Units..

ASTM D1970 – Self-adhering Polymer Modified Bituminous Sheet Materials Used as Steep Roof Underlayment for Ice Dam Protection..

ASTM D226 – Asphalt-Saturated Organic Felt..

ASTM D3909 – Asphalt (Glass Felt) Surfaced with Mineral Granules..

ASTM D4397 – Standard Specification for Polyethylene Sheeting for Construction, Industrial, and Agricultural Applications

ASTM D4869 – Asphalt-saturated (Organic Felt) Underlayment used in Steep Slope Roofing..

ASTM D5385-93 – Standard Test Method for Hydrostatic Pressure Resistance of Waterproofing Membranes, ASTM International

ASTM D6083 – Standard Specification for Liquid Applied Acrylic Coating Used in Roofing.

ASTM D6694 – Liquid-applied Silicone Coating Usedin Spray Polyurethane Foam Roofing Systems.

ASTM D7032 – Standard Specification for Establishing Performance Ratings for Wood-Plastic Composite and Plastic Lumber Deck Boards, Stair Treads, Guards and Handrails

ASTM E119 – Standard Test Methods for Fire Tests of Building Construction and Materials

ASTM E136 – Noncombustibility..

ASTM E1592 – Standard Test Method for Structural Performance of Sheet Metal Roof and Siding Systems by Uniform Static Air Pressure Difference

ASTM E1966 – Test Method for Fire-resistant Joint Systems.

ASTM E2178 – Standard Test Method for Air Permeance of Building Materials

ASTM E2357 – Standard Test Method for Determining Air Leakage of Air Barriers Assemblies

ASTM E283 – Test Method for Determining the Rate of Air Leakage Through Exterior Windows, Curtain Walls and Doors Under Specified Pressure Differences Across the Specimen

ASTM E492-09 – Standard Test Method for Laboratory Measurement of Impact Sound Transmission Through Floor-Ceiling Assemblies Using the Tapping Machine..

ASTM E84/UL 723 – Test Methods for Surface Burning Characteristics of Building Materials.

ASTM E90-09 – Standard Test Method for Laboratory Measurement of Airborne Sound Transmission Loss of Building Partitions and Elements..

ASTM E96 – Standard Test Methods for Water Vapor Transmission of Materials

CAN/ULC-S102-10 – Standard Method of Test for Surface Burning Characteristics of Building Materials and Assemblies

CAN/ULC-S741-08, Standard for Air Barrier Materials–Specification

CAN/ULC-S742-11, Standard for Air Barrier Assemblies – Specification

CPSC 16 CFR Part 1404 – Cellulosic Insulation..

CSA A23.3-04 – Design of Concrete Structures

CSA A23.3-14, Design of Concrete Structures – Annex D, Anchorage, CSA Group.

NFPA 13-10 – Installation of Sprinkler Systems.

NFPA 22-08 – Standard for Water Tanks for Private Fire Protection, National Fire Protection Association

NFPA 22-13 – Standard for Water Tanks for Private Fire Protection, Section 10.5

NFPA 285 – Standard Fire Test Method for the Evaluation of Fire Propagation Characteristics of Exterior Non-load-bearing Wall Assemblies Containing Combustible Components, National Fire Protection Association

NFPA 286 – Fire Test for Evaluating Contribution of Wall and Ceiling Interior Finish and Room Fire Growth

Standard Specification for Establishing Performance Ratings for Wood-Plastic Composite and Plastic Lumber Deck Boards, Stair Treads, Guards and Handrails.

UL 1479 / ASTM E814 – Fire-Resistance Ratings for Through-Penetration Firestops..

UL 1703 – Standard for Safety Flat-Plate Photovoltaic Modules and Panels.

UL 1994 / ASTM E2072 – Photoluminescent (Phosphorescent) Safety Markings..

UL 2034 – Standard for Safety of Single and Multiple Station Carbon Monoxide Alarms.

UL 263 – Fire Tests of Building Construction and Materials

UL 723 – Test for Surface Burning Characteristics of Building Materials

UL 790 – Standard Test Methods for Fire Tests of Roof Coverings.

UL 924 – Emergency Lighting and Power Equipment..